A slab matched to what goes on it and where it lives, from cellar and vault floors to equipment pads, sized, reinforced, and poured for the load and the access.
Credibility comes from how it's built, not from promises. Here's the order of operations on every concrete pads & slabs job.
We work out how the mix reaches the spot, whether that is a cellar, a vault under the sidewalk, or a tight rear yard, then grade and compact the base so the slab bears evenly and won't settle under load.
Slab thickness is set to what sits on it. A shed pad and a cellar floor under storage or equipment are not the same pour, so we size each one to its job.
Reinforcement is matched to the use, from mesh on light pads to a rebar grid for heavy loads and to bridge minor movement underneath.
For enclosed, cellar, or heated slabs we set a vapor barrier so ground moisture, common below grade in the city, doesn't wick up through the concrete.
We pour an air-entrained mix for freeze-thaw where the slab sees weather, cut control joints, and cure it properly before it carries anything.
Most contractors vanish after the deposit. We pick up the phone, show up when we say, and stand behind the work after the truck leaves. The follow-through is the difference.
A foreman we know runs your job and a vetted crew does the work, managed by Lucky's, one company accountable from the first call to the final walkthrough.
COI and lien waivers on file before we break ground. The documentation that lets commercial clients pay and gives homeowners peace of mind.
Prepped subgrade, reinforced and mixed to spec for the job, and proper curing. We build credibility through the process, not promises. On concrete pads & slabs, that starts with access and base prep.
Pads and slabs are priced to the load and the location: thickness, reinforcement, whether a vapor barrier is needed, and how hard the spot is to reach, from a cellar or sidewalk vault to a rear yard. City access and disposal put it above the national average. We size and price it to the slab's actual job rather than quote a flat rate.
That comes down to the load. A shed pad is lighter than a cellar floor or a pad carrying equipment, so we size thickness and reinforcement to your real use rather than a single default number.
Yes, and those are common city jobs. They come with access and moisture considerations we plan for, including how the mix gets down there and a vapor barrier to handle ground moisture below grade. Tell us the space and we will work out the pour.
For enclosed, cellar, or heated slabs, usually yes, because it keeps ground moisture from migrating up through the concrete, and moisture below grade is a real factor in the city. We advise based on what the slab is for and where it sits.
Some do, depending on size, location, and use, and city rules are their own animal. We flag when a permit or filing is likely so it is handled up front rather than discovered partway through.
Concrete keeps gaining strength after it looks set, and cold weather slows the early days. We give you a clear date to put equipment or storage on it for your specific pour.
You'll hear back from a real person, usually the same day. No call center, no runaround, no chasing us down.
Booking up fast this season. Or call (212) 555-0100